SP-2015E Máquina pelacables eléctrica de alta precisión

The SP-2015E is an electric wire stripping machine for small wires and multi-core cable inner cores. It processes AWG32–AWG11 conductors up to 4 mm OD, with a 20 mm maximum stripping length and 0.01 mm stripping-length tolerance for precise, repeatable benchtop processing.

The SP-2015E is a compact semi-automatic wire stripping machine designed for discrete wires, small multi-conductor cables, and inner cores of multi-core cables. It supports different wire diameters without blade replacement and uses sensor-triggered operation for short stripping cycles.

Key Features:

1. Small-Wire Processing: Suitable for discrete wires, small multi-conductor cables, and inner cores of multi-core cables.
2. No Blade Change Required: Processes different wire diameters without changing the blade set.
3. Sensor-Triggered Operation: Touch the sensor once to start a stripping cycle; the machine stops automatically after stripping.
4. Precise Adjustment: Digital displays and adjustment knobs support accurate wire diameter, centering, partial-strip, and conductor thickness settings.
5. Compact Benchtop Design: Suitable for small workstations and precision wire harness processing.

Operation:

1. Turn on the power switch.
2. Use the wire diameter adjustment knob and digital display to set the processing wire diameter.
3. Position the wire against the centering guide of the blade holder.
4. Touch the sensor once. The machine will complete one stripping cycle and stop automatically.
5. Use the centering adjustment knob to align the wire with the blade center.
6. Set the partial stripping length with the half-strip adjustment knob and reference scale.
7. Adjust the conductor thickness setting with the wire-core thickness knob and digital display. Rotate left to decrease the displayed value or right to increase it.