Model: SP-3010 SP-3025
SP-3010 no need to change the blade for different diameter wires, very good for multi-cores cables with different diameter inner cores.
SP-3010 SP-3025 Semi-automatic pneumatic induction wire stripping machine
Beschreibung
This machine is suitable for stripping all kinds of electronic wires, power cord sheathed wires, and sheathed core wires of different wire diameters.
1. It is designed with pure pneumatic induction, without a power supply, and the thick and thin wire tools are free of replacement and adjustment;
2. The cutter tool adopts four blades with 90 degrees vertical cross method, and the stripping is clean and tidy, which avoids vulnerable core wire, and conductor bending caused by two cross cutters.
3. The cutting depth only needs to be fine-tuned to support peeling length, full peeling, and half peeling.
4. The structure of the machine is compact and reasonable; the operation is simple.
Technical Data
| Model | SP-3010 | SP-3025 |
| Features | No blade change required for different wire diameters | |
| Conductor Cross-Section | 0.5-6mm² (max 10 mm²) | 0.5-25mm² |
| Stripping Length | 2-50mm | 3-60mm |
| Air Connection | 0.5MPa – 0.7MPa | |
| Production Rate | 1500 – 2000 pcs/h | |
| Weight | 25kg | 30kg |
| Dimensions | 40*37*20cm | 48*38*20cm |
Application
For small and big wire stripping
What is the SP-3010 SP-3025 pneumatic wire stripping machine used for?
The SP-3010 and SP-3025 are semi-automatic pneumatic stripping machines for wire harness production. They strip insulation from 0.5–25 mm² conductors with induction start, reaching 1500–2000 pieces per hour for medium and high-volume lines. The sensor-start design keeps both hands free for wire handling during repetitive work.
How does the induction start function work?
The machine starts the stripping cycle automatically when the wire tip touches the built-in sensor. The operator does not need to press a foot pedal, so both hands stay free for wire handling and the cycle time stays short. Both models share the same operating principle.
What conductor sizes can the two models process?
The SP-3010 covers 0.5–6 mm² conductors, extendable to 10 mm², with 2–50 mm stripping length. The SP-3025 covers 0.5–25 mm² with 3–60 mm stripping length. The four-blade head adapts to size changes without blade replacement. The head centers the wire automatically.
How does the four-blade cutting head work?
Four blades close at 90-degree angles around the conductor, centering the wire automatically and cutting the insulation evenly on all sides. This design strips different wire sizes without changing blades between batches. The blade set covers the full wire range of each model without replacement.
What air supply does the machine need?
The machines run on 0.5–0.7 MPa compressed air. The stripping head is fully pneumatic with no electric motor, which keeps the structure simple and reduces routine maintenance requirements. A standard factory air line with a filter regulator is sufficient for stable operation.
What are the machine dimensions and output?
The SP-3010 measures 40 × 37 × 20 cm at 25 kg, and the SP-3025 measures 48 × 38 × 20 cm at 30 kg. Depending on wire size, the pneumatic cycle reaches 1500–2000 pieces per hour. Both models sit on a standard workbench and connect to the workshop air supply.
What warranty and certification apply?
WIREPRO machines are CE certified with a one-year warranty and remote technical support. Free sample testing is available before purchase, so you can send your wires and verify the stripping result in advance. Spare blades and wearing parts are available for quick replacement.
Get Details & Price Now
If you hope to inquiry just this product, please send a message here. If you hope to inquiry several products, please Add To Quote, quote all products on the Request Quote page.
WIREPRO will send quotes back to you ASAP : ）
